Trans Pallet Original Japan Made Engine 2.5t Hydraulic Diesel Forklift with Side Shift
Description:
1. Streamlined exterior, more beautiful.
2. Wide-view mast, improve the efficiency and safety of operations.
3. Man-machine engineering design, the buffer device for steering axle, the floating shock absorber configured on the engine, the adjustable steering wheel and the semi-floating bonnet built-in heat and sound insulation ensure the comfort of driving.
4. Japan origin engines meet EUIII mission control regulation and obtain EPA accreditation.
5. The wide-open integral hood enlarges the access for engine maintenance and inspection.
6. The throttling device in pipe system, preventing the mast from falling accidently.
Applications:
- The machine body is designed with big arc streamline and fitted with open anti-slippage pedal.high position air suction inlet is fitted behind the top protection frame above the column to ensure the engine absorbs clean air and prolong the service life.The engine hood has functions of sound absorption and heat isolation.
- Rear in-built dual lifting cylinder is used,wide visual view,safety operation and high efficiency.
- A hydraulic converter produced by introduction of japanese technology,high efficiency,no oil leakage,reliable work,compact structure of hydraulic transmission,shift gear valve,micromotion valve,characterized by smooth starting,stepless speed adjustmet,micromotion and acceleration performance.
- Full hydraulic steering gear,transverse cylinder,steering axle integrated into one body,flexible steering,compact structure and convenient repair.
- Adjustable driver’s seat,reducingoperation fatigue to a maximum extent.Tilt lifting steering wheel and new type multifunc-tional panel fully represents harmony between the machine and human.
- Imported sealing parts are used in the cylinder,cone sealing used in fittings,good sealing performance,long service life;multiple reversing valve with automatic tilt locking device,advanced strudture to meet safety requirement.
- Big power and free-maintenarting battery with American technology,small volume,good performance,long storage period;general contactor arranged in the electric circuit,prolong life of the key switch,completely removing self-discharge.
- Beautiful appearance,quick and smooth lifting,high high productivity,it is an ideal loading and unloading machin for stations,ports,docks,warehouse,warehouse,airports and factories etc which need low noise and small smoke.
Specifications:
| HAFE International Limited SPECIFICATIONS of 2-4.5Ton Forklift |
| 1 | Brand | HAFE |
| 2 | Model | Unit | FD35 | FD35T | FD40T | FD45 | FD45T |
| 3 | Power type | | Diesel |
| 4 | Rated capacity | kg | 3500 | 4000 | 4500 |
| 5 | Load center | mm | 500 |
| 6 | Operator type | | Drive in seat |
| 7 | Max. lift height of mast with Load-backrest | mm | 4262 | 4275 | 4280 |
| 8 | Max.lift height of fork(standard) | mm | 3000 | 3000 | 3000 |
| 9 | Height of mast (standard) | mm | 2180 | 2150 | 2330 |
| 10 | Free lift height(standard) | mm | 170 | 150 | 150 |
| 11 | Height of Load-backrest | mm | 1222 | 1240 | 1240 |
| 12 | Distance from seat to overhead guard | mm | 1000 |
| 13 | overhead guard height | mm | 2090 | 2105 | 2290 |
| 14 | Length with fork | mm | 3763/2693 | 3965/2895 | 4175/3105 |
| 15 | Front overhang | mm | 498 | 500 | 565 |
| 16 | Rear overhang | mm | 495 | 495 | 540 |
| 17 | Wheel base | mm | 1700 | 1900 | 2000 |
| 18 | The height of traction pin | mm | 310 | 330 | 350 |
| 19 | Min. ground clearance | mm | 135 | 130 | 160 |
| 20 | Overall width | mm | 1225 | 1410 | 1480 |
| 21 | The distance between forks | mm | 1060/250 | 1290/260 | 1370/300 |
| 22 | Tread(front /rear) | mm | 1000/970 | 1160/1065 | 1180/1190 |
| 23 | Min. Turning radius(outside) | mm | 2420 | 2700 | 2780 |
| 24 | Min. Turning radius(inside) | mm | 200 | 230 | 270 |
| 25 | Min. Intersecting aisle | mm | 2400 | 2685 | 3365 |
| 26 | Mast tilt angle | deg | 6° / 12° |
| 27 | Fork size | mm | 1070X125X45 | 1070X130X50 | 1070X150X50 |
| 28 |
Speeds | Max.Drive speeds(with/without load) | km/h | 19/19 | 18/19 | 18/19 |
| 29 | Lifting speeds (with load) | mm/s | 330/370 | 350/380 | 400/450 |
| 30 | Lowering speeds(with /without full load) | mm/s | 350/400 | 350/400 | 350/400 |
| 31 | Max. tractive force | KN | 20/16.3 | 20/16.3 | 20/18 | 20/19 | 20/19 |
| 32 | Max.grade ability (with/without full load) | % | 15/20 | 16.5.20 | 15/18 | 18/20 | 18/20 |
| 33 | Total weight | kg | 4700 | 5310 | 6400 |
| 34 | Weight Distribution full load (front/ rear) | kg | 7380/820 | 8380/930 | 9540/1360 |
| 35 | Weight Distribution zero load(front / rear) | kg | 1880/2820 | 2120/3190 | 2630/3770 |
| 36 | Quantity of wheels | | 2 X / 2 |
| 37 | Type of tyres | | Penumatic tires |
| 38 | Tires | Front | | 28X9-15-12PR | 250-15-16PR | 300-15-18PR |
| 39 | Rear | | 6.50-10-10PR | 6.50-10-10PR | 7.00-12.12PR |
| 40 | Driving Brake | | hydraumatic pedal |
| 41 | Parking Brake | | Mechanical manual |
| 42 | Battery | V/AH | 12 / 80 |
| 43 | Engine (standard) | Model | | XINCHANG A495BP | XINCHANG A498BPG | XINCHANG 4D35G | YT LR4B3-G |
| 44 | Rated output | kw/rpm | 42/2650 | 45/2650 | 48/2200 | 61/2200 |
| 45 | Rated torque | N.m/rpm | 174/1800-1900 | 198/1800 | 230/1600-1800 | 288/1600 |
| 46 | No.of cylinder | | 4-95X105 | 4-98X105 | 4-98X105 | 4-108X125 |
| 47 | Displacement | L | 2.98 | 3.168 | 3.168 | 4.578 |
| 48 | Fuel tank capacity | L | 60 | 70 | 80 | 80 |
| 49 | Number of speeds for transmission | 1-1 Power shift transmission / 2-2 Hand shift transmission |
Pictures:
